张家港弯管机厂家-永丰机电制造有限公司

产品分类

弯管机

当前位置:首页 > 产品展示 > 弯管机

CNC控制液压弯管机(DW-130CNC)


DW-130CNC x 2A-1S
CNC控制液压弯管机
CNC HYDRAULIC PIPE BENDING MACHINE
■弯管采用伺服驱动,强劲有力;
■转角及送料为伺服电机驱动,迅速、准确;
■同时储存多组加工程序,并可灵活切换,方便了品种繁多的产品加工,大大提高了生产效率;
■具有自动检测错误及故障的功能,当出现任何非正常动作或有任何危险存在时机器会立即停机并发出异警,帮助操作者排除故障;
■特别适用于空间角度多且精度要求高的管件加工。如:汽车油管、空调管、摩托车自行车等车架的生产制作。 
■Bending pipe with hydraulic drive,strong power.
■The drive of rotating angle and feeding with servo motor, rapid and accurate.
■The same time storaging of multi group processing procedures, and can be flexible to switch, convenient for a wide variety of product processing, greatly improving the production efficiency.
■Automatic detecting error and fault function, the machine will immediately stop and send out false alarm when there is any abnormal action or any danger exists,to help the operator troubleshooting.
■Especially suitable for high precise and high accuracy pipe processing. Such asautomotive tubing, air conditioning pipe, motorcycle bicycle and other frame production.

1、电控系统:采用日本知名控制器,例如:三菱会社或安川出品的伺服驱动器、伺服马达、定位模组、CPU等,性能强,稳定性佳;
2、三菱超大型CPU可容纳多组的档案编辑。每一档案可设定20个弯管角度,记忆体可储放多组档案;
3、工业用电脑型内装WINDOWS作业系统与三菱伺服系统搭配(选用);
4、具自动侦测错误及故障功能,并在荧幕显示,让操作者容易排除障碍;
5、所有加工资料都由触控荧幕输入;
6、每一弯管皆可因不同材质变化设定补偿值、速度、脱模间隙;
7、同一支管子每一弯皆可单独编写5个动作顺序、10段速度,让操作者搭配使用,提高工作效率、降低管件干涉点;
8、触控荧幕可中英文切换。显示他国语言亦可依需求订购;
9、送料方式可因不同需求选择直送或夹送;
10、可将XYZ座标自动转换成YBC加工值;
11、资料经编辑完成后,有钥匙保护,防止资料被任意修改;
1、The electric control system is the Japanese famous controller.For example servo driver,servo motor,positioning module,CPU and other produced by Mitsubishi clubs or Yaskawa,strong performance and good stability.
2、Mitsubishi super large CPU can accommodate many groups of file editing.Each file can be set at 20 angles,memory can store many sets of files.
3、Industrial computer based WINDOWS operating system and MITSUBISHI servo system.
4、With automatic detection error and fault function,and in the screen display,so that the operator easy to remove obstacles.
5、All processing information by the touching screen input.
6、Each bending pipe can set the compensation value, speed, release gap according to different materials.
7、A pipe per bending all individually prepare five action sequence and 10 speed,allows the operator to match the use,improve work efficiency,reduce the fitting interference points.
8、Touching screen can be switched in English & Chinese.It can also be ordered in other language according with the requirements.
9、Feeding mode can be chosen to send or clip with different needs.
10、XYZ coordinate can be automatically converted into YBC value.
11、It has the key to protect after the information is edited,prevent data were arbitrarily modified.